plastic fabrication services

Flame Polishing

Flame polishing is a surface finish technique for plastic or glass products. In this process, the product surface or edges  are directly exposed to an open flame to melt the surface layer. As the product surface is exposed to the flame for a specific time, the surface layer partially melts. The partial melting of the surface layer causes surface tension that smoothens the surface. At Ehren-Haus, we specialize in various types of plastic flame polishing techniques.

Ehren-Haus Plastic Flame Polishing Capabilities 

We employ the following plastic flame polishing methods to improve the aesthetic appeal and utility of plastic products.

Edge Polishing

Since the flame size of the oxy-hydrogen flame gun can be adjusted easily for flame polishing, the thin edges of the plastic products can be polished. We can polish the edges of width 1 ½ʺ to 2ʺ i.e., 38-51 mm. Our skilled flame polishing operators are capable of fine polishing the product edges for reducing sharpness, waviness, etc.

Face Polishing

Product face polishing can be efficiently done by using a broad flame of an oxy-hydrogen flame gun. There are two types of faces in the product design, the outer faces, and the inner faces. We are capable of surface finishing the inner and outer faces of plastic products.

-    Product Outer Surface Polishing: The outer faces or surfaces of the plastic products can be finished by using flame polishing. We are capable of surface finishing the faces of size between 6ʺ to 12ʺ i.e., 150 to 300 mm at a time.

-    Product Inner Surface Polishing: Surface finishing of the inner faces of the products is a little complicated as compared to outer faces. However, by using flame polishing the inner surfaces of the products can be polished. It does demand critical operator skills. Since the inner faces are restricted by the design of products, the operator requires to adjust and move the flame gun precisely. Otherwise, it can cause the surface-under-layer burn, uneven surface finish, etc. We have skilled and highly experienced operators at Ehren-Haus they can finish the inner faces of the intricate plastic products.

services.jpg

List of Plastic Materials We Can Polish

The above discussed plastic polishing methods are apt for plastic materials such as:

  • Acrylic

  • PMMA

  • Plexiglas

  • Polycarbonate

  • PET-A

  • PET-G

  • Perpex

  • ABS

  • Styrene

  • HDPE

  • UHMW

Benefits of Flame Plastic Polishing

The following benefits of flame plastic polishing make it a suitable plastic surface finishing technique over sand, buff, or solvent polishing.

No Pre-processing Required

The flame plastic polishing method does not demand any pre-processing on the surface. Unlike other surface polishing methods, flame plastic polishing requires no pre-heating, solvent etching, or sand polishing. It can be performed directly on the manufactured product surface. This reduces the turnaround time of finished products, therefore, we are capable of offering quick surface polishing.

Oxy-hydrogen flame gun is the only equipment required for flame plastic polishing. The flame gun can suffice for all the types, sizes, and shapes of plastic products.

Single Equipment Working

No Restriction on Product Size or Shape

Plastic products of any shape and size can be subjected to flame polishing. Straight as well as curved surfaces can be finished. As the flame intensity can be adjusted, therefore, the smallest and intricate parts of the product can be finished, provided the operator is highly skilled and precise with the finishing work.

Since flame polishing is a post-manufacturing process, it is required to be precise yet quick. Flame polishing offers rapid finishing as no pre-processing is required and the molten layer of plastic product settles instantly after smoothening. Therefore, surface finishing with flame polishing method takes a fraction of overall production time

Quick Processing

Why Choose Ehren-Haus for Plastic Flame Polishing?

Ehren-Haus has emerged as one of the leading plastic flame polishing services in the US owing to the following reasons.

1.

We have a 28, 169 sq. ft. large industrial facility dedicated to the design, manufacturing, storage, pre-processing, and post-processing activities, out of which flame polishing is one of the special services of Ehren-Haus.

2.

Our facility is highly equipped, and therefore, we are capable of offering in-house plastic polishing services as we have procured the required equipment.

3.

We possess 35 years of experience and a great reputation, and our employees are highly skilled, highly experienced, and experts in their respective fields. Thus, our flame plastic polishing services are only performed by workers with critical skills and long-term hands-on experience.

Apart from Flame Polishing services, we also provide diamond polishing, plastic threading, line bending, vacuum forming, cnc machining, buff polishing and other plastic engineering services. If in case you are looking for flame polishing services or facing any query regarding the same, please feel free to contact our team. Our experts will be happy to assist you.
 

Stay Connected With Us!

  • Facebook - White Circle